Integration · Developer tools

Connect Claude & ChatGPT to emnify

Ask your AI which devices are online, how much data a SIM used last month, or what happened to a device overnight, and get the answer from your emnify workspace. It can list and filter devices and SIMs, read usage, connectivity and events, and look up service and tariff profiles. It can also create devices, tag them and send an SMS to a device.

Connect emnify free

Free plan, no credit card. Takes about a minute.

Try asking

“Which of our trucks are offline right now?”
The AI lists devices filtered by name and connectivity status and shows which ones are not attached to a network.
“How much data did SIM 8988303000000012345 use this month?”
It finds the SIM and reads its data and SMS usage totals.
“What happened to device 4412 in the last 24 hours?”
It lists the device's events, such as attach and detach, quota and status changes.

What your AI can do

Devices and SIMs

List and filter devices and SIM cards, read ICCID, IMSI, status, profiles and tags, and create or tag devices.

Usage and connectivity

Read daily and monthly usage per device, SIM or organisation, data quotas and live connectivity with network location.

Events and SMS

List events for a device, a SIM or the whole workspace, read a device's SMS and send an SMS to a device.

“What did the organisation spend on data and SMS last month?”
It reads the monthly usage and cost statistics for your own organisation.
“Send the text RESET to device 4412.”
It sends an SMS with that text to the device. This is a real message to the device.
“Add a new device called Truck 27 with the standard service and tariff profile.”
It looks up the service profiles, tariff profiles and status IDs, then creates the device.

27 tools for emnify

These tools are switched on when you connect. You can switch any of them off, or require your approval before it runs.

add_endpoint_tagChanges dataAssign an existing tag to a device by `endpoint_id` and tag `id`. Find tag IDs with list_tags.
create_endpointChanges dataCreate a device (endpoint) with a `name`, `status` {id}, `service_profile` {id} and `tariff_profile` {id}; optionally attach a SIM via `sim` {id, activate}. Look up profile IDs with list_service_profiles and list_tariff_profiles.
get_endpointGet one device (endpoint) by `endpoint_id`, with its SIM, status, service and tariff profile, IP address and tags.
get_endpoint_connectivityGet a device's live connectivity status (online, attached, offline) and current network location by `endpoint_id`.
get_endpoint_connectivity_infoGet detailed network connectivity information for a device by `endpoint_id`, such as the serving network and radio technology.
get_endpoint_daily_usageGet daily data and SMS usage for a device by `endpoint_id`, optionally between `start_date` and `end_date` (YYYY-MM-DD).
get_endpoint_data_quotaGet the data quota currently set on a device by `endpoint_id`: volume, expiry and what happens when it runs out.
get_endpoint_smsGet one SMS of a device by `endpoint_id` and `sms_id`, with delivery status.
get_endpoint_usageGet data and SMS usage totals for a device by `endpoint_id` (current and last month).
get_my_organisationGet the connected emnify organisation's own details. Use to confirm which account you are working in.
get_organisation_daily_usageGet daily usage statistics for the organisation between `start_date` and `end_date`. Use 'my' as `org_id_or_my` for your own.
get_organisation_usageGet monthly data and SMS usage and cost statistics for the organisation. Use 'my' as `org_id_or_my` for your own.
get_service_profileGet one service profile by `profile_id`, with its services and limits.
get_simGet one SIM by `sim_id`, with ICCID, IMSI, status and the device it is assigned to.
get_sim_usageGet data and SMS usage totals for a SIM by `sim_id`.
list_endpoint_eventsList events for one device by `endpoint_id` (attach/detach, PDP context, quota and status changes). Filter with `q` and page/limit.
list_endpoint_smsList SMS messages sent to and from a device by `endpoint_id`.
list_endpoint_statusesList the possible device (endpoint) status values and their IDs, for use when creating endpoints or filtering.
list_endpoint_tagsList the tags assigned to a device by `endpoint_id`.
list_endpointsList devices (endpoints). Filter with `q` like 'name:truck,status:0' or by iccid, imei, tags or connectivity_status, and sort with `sort`. Paged with page/limit.
list_eventsList events across the workspace. Filter with `q` like 'from:2024-01-01T00:00:00Z,until:...,severity:...,endpoint:...'. Paged with page/limit.
list_service_profilesList service profiles (which services like data and SMS devices may use), with their IDs.
list_sim_eventsList events for one SIM by `sim_id`. Filter with `q` and page/limit.
list_simsList SIM cards. Filter with `q` (e.g. by iccid, status or endpoint) and sort with `sort`. Paged with page/limit.
list_tagsList tags used to group devices, optionally filtered by `name`.
list_tariff_profilesList tariff profiles (which networks and rate zones devices can use), with their IDs.
send_sms_to_endpointVisible to othersSend an SMS to a device by `endpoint_id` with the text in `payload` (max 160 characters for one SMS), optionally a `source_address` sender. Sends a real message to the device.

Set up in three steps

1
Pick the app
Create a free PipMCP account and choose emnify from the app list.
2
Paste your key
Paste an emnify application token. In the emnify Portal go to Integrations > Application tokens, click Add token, add a description and click Create Application Token. Copy it right away, because it cannot be shown again. The token only works in the workspace it was created in.
3
Add the link to your AI
You get a personal MCP link. Add it to Claude, ChatGPT or Cursor:
1. Click your name, then Settings › Connectors › Add custom connector.
2. Paste your link as the Remote MCP server URL.
3. Switch it on from the + menu in a chat.

Questions

What can the AI do in emnify?

The AI can list and read devices (endpoints), SIMs, tags, service profiles and tariff profiles. It can read usage per device, SIM and organisation, data quotas, connectivity status and events, and read a device's SMS. It can create devices, assign tags and send an SMS to a device if you switch those tools on.

Does the AI see my emnify credentials?

No. Your emnify credentials are encrypted at rest and never shown to the AI. After you save them, they are not shown again, not even to you. The AI only sees the results of the tools it calls.

Can I control what the AI is allowed to do?

Yes. You choose which tools are switched on, so you can start with lookups and usage only. Sending an SMS reaches a real device, and creating a device changes your workspace, so both can require your approval before they run. Every tool call is logged.

Does it work with ChatGPT?

Yes. In ChatGPT go to Settings › Apps & Connectors › Advanced and turn on Developer mode, then add your PipMCP link. Developer mode needs a paid ChatGPT plan: Plus, Pro, Business or Enterprise. The same link also works in Claude (Settings › Connectors › Add custom connector), Cursor and other MCP clients.

What does it cost?

PipMCP has a free plan with no credit card required. Paid plans bill per completed task. You also need your own emnify account.

Which emnify workspace does the AI work in?

The one your application token belongs to. emnify scopes each application token to the workspace it was created in, so create the token in the workspace you want the AI to use. The AI can confirm the account with the tool that reads your own organisation.